Located in the heart of Hamilton, New Zealand, Hemi Metals takes pride in being a trusted local source for quality steel. We understand the demands of Kiwi industry, which is why our C35 round bar is produced and supplied to meet the highest standards. We ensure this versatile medium carbon steel is readily available for workshops and projects across the region, backed by our commitment to reliable service and expert local knowledge.
The C35 round bar is a dependable medium carbon steel known for its excellent balance of strength and machinability. Its composition includes a carbon content of around 0.35%, which gives it good tensile strength and hardness while remaining easier to work with than higher-carbon grades. This combination makes it highly responsive to heat treatment processes like hardening and tempering, allowing its mechanical properties to be tailored for increased durability and wear resistance in finished components.
|
Variant |
Cast |
Di |
Weldability |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
C35E |
CC |
0.98 |
CEV 0.65max |
Min |
0.35 |
0.15 |
0.50 |
– |
0.015 |
– |
– |
|
Pcm 0.49max |
Max |
0.39 |
0.35 |
0.80 |
0.030 |
0.035 |
0.30 |
0.30 |
| Variant | Condition | Format | Dimension [mm] | Yield strength min [MPa] | Tensile strength [MPa] | Elongation A5[%] | Hardness | Impact (ISO-V) strengthmin |
|---|---|---|---|---|---|---|---|---|
| Rp0.2 * Reh, ** Rel | ||||||||
| C35E | +AR | Round bar | < 20 | 345* | 520-690 | 10 | < 230 HB | 0 °C 0 J (long) 0 |
| EN | C35 (1.0501) |
| DIN | C35, CM35 |
| BS | 970 070M36 |
| UNI | C35 |
| JIS | S35C |
Considerations for installing C35 Round Bar include ensuring proper alignment, adequate support, correct machining, and adherence to safety and load-bearing requirements.
Yes, C35 Round Bar can be welded, but it requires proper preheating and post-weld heat treatment to avoid brittleness. Using appropriate welding electrodes is also essential for achieving strong, durable welds.
C35 Round Bar is available in various sizes, typically ranging from 10 mm to 250 mm in diameter, with custom sizes available upon request.
This adaptability makes the C35 round bar a popular choice for a wide array of industrial applications. It’s commonly machined into essential components like gears, shafts, bolts, and studs, where a blend of strength and toughness is required. You’ll also find it used in the manufacturing of forgings and assemblies for general engineering, agricultural machinery, and the automotive sector. Its reliable performance makes it a go-to material for creating parts that need to withstand significant stress and wear.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Hemi Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Hamilton New Zealand
Copyright 2024 Hemi Metals. All rights reserved
