Hemi Metals is a reputable manufacturer and supplier of top-notch OHNS Round Bars, proudly based in Hamilton, New Zealand. With a strong focus on precision engineering and dependable performance, this company delivers expertly crafted tool steel products that are perfect for demanding industrial applications. Hemi Metals is dedicated to providing consistent quality, remarkable durability, and exceptional service to customers across a variety of sectors. Their OHNS Round Bars are made using advanced manufacturing techniques and rigorous quality controls, ensuring superior dimensional accuracy, reliable hardness, and excellent wear resistance. As a result, Hemi Metals has become a go-to partner for clients in search of trustworthy tool steel solutions.
OHNS Round Bars are primarily made from high-carbon steel that’s alloyed with chromium, manganese, and tungsten, striking a fantastic balance between hardness and toughness. This grade boasts outstanding wear resistance, good dimensional stability, and the ability to achieve high hardness through oil hardening. Mechanically, OHNS bars show impressive compressive strength, high tensile strength, and good machinability when in the annealed state. The material keeps its edge sharp and resists deformation under service conditions, making it an excellent choice for applications that demand durability and precision performance.
| Grade | OHNS Round Bar |
|---|---|
| Specification | aaaaaaaaaaaaa |
| OHNS Square bar size | 4 to 100mm |
| OHNS Steel Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| OHNS High Speed Steel Hex Bar size | 2-100mm A/F |
| OHNS Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| OHNS Steel Rectangles Size | 33 x 30mm to 295 x 1066mm |
| OHNS High Speed Steel Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| OHNS Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| OHNS Steel Section | 3.0 to 12.0mm thickness |
| OHNS High Speed Steel Round bar size | Diameter: 3-~800mm |
| OHNS Billet Size | 1/2″ to 495mm Diameter |
| OHNS Steel Round Bar Standard Dimensions | Diameter / Height: |
| OHNS Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| OHNS Steel Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| OHNS High Speed Steel Technique | OHNS Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| OHNS Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | OHNS Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square Bar, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
| Our OHNS Round bar conforms to NACE MR0175/ISO 15156 | |
| C | Si | Mn | P | S | Cr | W |
| 0.85-1.00 | 0.15-0.35 | 1.00-1.20 | 0.030max | 0.030max | 0.50-0.70 | 0.50-0.70 |
| Maximum Stress(N/mm²) | Yield Stress(N/mm²) | Elongation | Impact Strength (joule) | Hardness value (BHN) |
| 950 | 465 | 10% | 25 | 288 |
| STANDARDS | 100MnCrW4 | O1 | DIN 2510 | AISI O1 | AFNOR 90MWCV5 | JIS SKS3 |
OHNS (Oil Hardened Non-Shrinking) round bars are sized based on their diameter, typically ranging from 6 mm to 300 mm, with standard lengths ranging from 3 meters to 6 meters.
OHNS (Oil Hardened Non-Shrinking) rods are available in different grades, such as OHNS 1, OHNS 2, and OHNS 3, varying in hardness, toughness, and application suitability for manufacturing and toolmaking.
Yes, laser welding can be used for OHNS (Oil Hardened Non-Shrinking) bar, as it offers precision, minimal heat input, and controlled weld quality, making it suitable for hardenable tool steels.
These OHNS Round Bars are widely utilized in tooling, manufacturing, and engineering applications thanks to their strong wear resistance and stable hardness. They’re perfect for crafting cutting tools, dies, punches, shear blades, and gauges that require sharp edges and consistent performance. In the automotive and machinery industries, these bars are essential for forming tools, templates, and measuring instruments. Their durability and dimensional stability also make them ideal for precision components, mold inserts, and industrial knives. OHNS Round Bars are designed to support demanding operations where a long service life, reliable strength, and consistent performance are crucial.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Hemi Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Hamilton New Zealand
Copyright 2024 Hemi Metals. All rights reserved
