Hemi Metals, located in Hamilton, New Zealand, is a reliable manufacturer and supplier of high-quality Stainless Steel 410 Round Bars and Rods, designed for tough industrial applications that demand strength and wear resistance. SS 410 is a martensitic stainless steel celebrated for its impressive hardness, decent corrosion resistance, and robust mechanical properties. Crafted with precision in dimensions, a smooth surface finish, and strict metallurgical standards, these round bars and rods promise consistent performance even in challenging conditions. Hemi Metals caters to various industries, including automotive, oil & gas, power generation, chemical processing, and heavy engineering, where durability and performance are crucial.
Stainless Steel 410 is composed of about 11.5–13.5% chromium, with a controlled carbon content that boosts its hardness and strength. This specific chemical makeup not only provides moderate corrosion resistance but also allows for excellent heat treatment responses. Typically, SS 410 round bars and rods exhibit tensile strength between 480–700 MPa in their untreated state, with even greater strength achieved after hardening and tempering. The material is magnetic, offers good wear resistance, and maintains moderate ductility. Additionally, it boasts good machinability when annealed and reliable performance under significant mechanical stress.
Stainless Steel Round Bar Specification : ASTM A276 / A479, ASME SA276 / A479
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
Type | SIZES (Inches) | ISO Tolerance | SIZES (mm) |
|---|---|---|---|
Peeled and Polished | 1.50″ to 6.00″ | h11-DIN 1013 | 40.00 to 150.00 |
Cold Drawn and Ground | 5/6″ to 2.50″ | h9-h8-h11-h10 | 10.00 to 75.00 |
Cold Drawn and Polish | 1/8″ to 3.00″ | h9-h8-h11-h10 | 3.00 to 75.00 |
Peeled and Ground | 3/4″ to 2.00″ | h10-h9-h11 | 20.00 to 50.00 |
Cut to size on request (tolerance +2/-0 mm). 410 Stainless Steel Bars Standard lengths of 2000 mm up to 6000 mm.
50.0 | 6.0 |
45.0 | 5.0 |
60.0 | 8.0 |
55.0 | 7.0 |
70.0 | 10.0 |
65.0 | 9.0 |
75.0 | 12.0 |
90.0 | 20.0 |
80.0 | 16.0 |
100.0 | 25.0 |
160.0 | 35.0 |
130.0 | 30.0 |
200.0 | 40.0 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of 904L Stainless Steel Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 904L.0 |
Stainless Steel 410 Round Bars/Rod generally does not require additional corrosion protection coatings, as it offers moderate corrosion resistance due to its chromium content. However, in highly corrosive environments, coatings may enhance durability.
When selecting Stainless Steel 410 Round Bars/Rod, consider factors like strength requirements, corrosion resistance, heat treatment needs, and the specific application environment to ensure optimal performance and durability.
Stainless Steel 410 Round Bars/Rod is not ideal for hygienic and sanitary applications due to its moderate corrosion resistance. For such uses, higher grades like 304 or 316 are recommended for better resistance.
Stainless Steel 410 Round Bars and Rods find extensive use in applications that require high strength, wear resistance, and moderate corrosion protection. Common uses include shafts, fasteners, bolts, valve components, pump parts, spindles, bushings, and mechanical tooling. In sectors like oil & gas, automotive, and power generation, these bars are essential for turbine parts, couplings, and load-bearing mechanical components. SS 410 round bars and rods are also utilized in chemical processing machinery and general engineering equipment, thanks to their outstanding hardness and mechanical strength.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Hemi Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Hamilton New Zealand
Copyright 2024 Hemi Metals. All rights reserved
